MC4A - Dental Electrosurgery Unit

$1,716.00

Description:

The MC4A provides a SURGE mode for incision an excision with pronounced concurrent homeostasis, and a COAG mode for pin-point accurate coagulation.
Safe and effective for bipolar forceps coagulation in wet fields and around exposed bone.
Simple to learn and operate as well as cost effective, the MC4A is ideal for the occasional uses encountered in Orthodontics, Periodontics and General restorative dentistry.
The isolated output means that the instrument will not work without the dispersive plate. The unit comes with a 2 year warranty, “Flexi-plate” dispersive plate, 5 “Ultra-flex” electrodes, and an Owner’s Manual.
IEC 60601-1-2 EMC compliance make this instrument as friendly as possible around other equipment.
It does not have the pure CUT feature of the Radiosurge and is therefore not recommended for implant exposure of biopsy.
All the other virtues of the Radiosurge are incorporated; isolated output, full operating room safety, and precision operation.

Characteristics:

“Spark-Free” Technology*

The MC-4A “spark-free” technology, which incorporates RF band pass filtration, adds significantly to patient comfort by eliminating spark induced sensations and helps to reduce the risk of tissue recession necessary for successful immediate impressions in crown preparation, crown lengthening, and other aesthetically critical procedures, by significantly reducing collateral heat production.*This technology is used in ophthalmic coagulators where very tight control of coagulum is critical.

Floating Return Technology

Floating return technology now brings to the dental suite the electrical safety common to operating room general surgery units, and also allows the safe, effective application of bipolar coagulation without taking the extra ordinary precautions required for ground referenced machines.
Surgical mode allows incision with pronounced effective concurrent hemostasis.
COAG Mode provides exceptional coagulation with monopolar ball Electrode or optional bipolar forceps.

Technical Specifications:

IEC Clasification: Class 1 medical, high frequency surgical, non-ionizing radiation device
Configuration: Monopolar, isolated output, type BF ports

Operating Modes

SURGE: 50% cut 50% coag blended 50 watts into 100ohms +10%-5%, crest factor 1.9 Modulation : 2xline frequency, 100 or 120Hz, sinosoidal
COAG: 50% duty cycle 25 watts into 100ohms +10%-5%, crest factor 2.6
Modulation: Line frequency, 50 or 60Hz, sinusoidal
Output Voltage: 500V p-p (.5kVp p-p), open load, SURGE mode
Source Impedance: 500ohms, nominal
Operating Frequency: 3.0mHz +/-5%, nominal
Power Control: Manual analog, continuously variable
Operational Duty Cycle: 10 seconds ON, 20 seconds OFF (not electronically enforced)
Temperature Range: -20C to +85C storage, OC to +40C operating, <80% RH non condensing
Cooling: Convection
Splash Rating: IPO
Actuation: Single foot pedal (isolated low voltage circuit, IP20 splash resistant rust proof plastic pedal)
Dispersive Monitor: N/A
Active Indication: LED light, tone (defeasible)

Power Requirements:

120V 60Hz, +/-10%, 240watts maximum consumption
230V 50HZ, +/-10%, 240VA maximum consumption
NOTE: Field selection of operating voltage requires a skilled technician
Size and Weight:
8.5″wx3.5″hx5.75″d - Not including controls and jacks - 5.5 pounds (9 pounds for shipping)
21.6cm wx8.89cm hx14.6cm d - Not including controls and jacks - 2.5kg (4.1kg for shipping)
Warranty: 2 years (exclusive of accessories)

Safety Approval:

Tested to:

Unit Includes:

A comprehensive electro surgery technique manual
Flexible dispersive plate
Autoclavable handpiece and cord with six ultra-flex bendable tips.
The dispersive plate and handpiece feature standard eight-foot cables for convenience and freer movement during use.

Add to Cart: