Explor-X AC - Intra-Oral X-Ray Unit

ENGINEERING FOR UTMOST PERFORMANCE

• The Explor-X intra-oral line has been designed to maximize efficiency of operation to concentrate on diagnosis rather than the procedure to obtain the image.
• Thanks to a built-in algorithm, the system automatically compensates the mains voltage fluctuations guaranteeing the best stability in film darkening.
• The duty cycle (waiting time between exposures) is 1:32, meaning that after a 0.5 second exposure, the operator need only wait 16 seconds to take the next x-ray. This translates into high efficiency when a multitude of exposures need be taken in sequence.
• Patient safety is ensured by a low dose while a “back-up” timer prevents unwanted exposures.
• The Explor-X may additionally work with a remote x-ray outside the operatory as well as a “ready” and “active” X-Ray light.
• Exposure Times 0.02 to 3.2 seconds
• Electrical stability in the busiest of facilities
• Concentrate on diagnosis and treatment instead of the x-ray procedure

• Choose between the essential unit or optimized parameters. Both AC and ACP run off an AC Generator allowing 70kV, 8mA.
• The AC has classic manual time selection.
• For those who prefer a no-frills unit, the AC is the best tradeoff between performance and budget.
• The ACP on the other hand allows selection of the best exposure parameters using pre-programmed anatomic features. To take X-ray, choose 1) your patient size, and 2) the dentition area to be examined – and you’re ready!
• Additionally the operator may turn on the digital acquisition feature by pressing a button on the console which then optimizes use with digital sensors.
• Both compatible with any brand digital sensors
• Choose between the essentials or optimal customization of parameters
• Anatomic programs allows you 30 pre-set times (ACP Only)

• Extension Arm: 30cm (11-13/16") 30-7/8"
• Extension Arm: 60cm (23-5/8") 42-3/4"
• Extension Arm: 80cm (31-1/2") 50-5/8"

• Extension Arm: 30cm (11-13/16") 56-5/16"
• Extension Arm: 60cm (23-5/8") 68-1/8"
• Extension Arm: 80cm (31-1/2") 76"

• Power Supply: 230V ±10% 50Hz 120V ±10% 60Hz
• X-ray Tube: 70kV, 8mA
• Focal Spot: 0.8mm IEC 336
• Focus to Skin Distance: 20cm (7-7/8") standard / 30cm (11-13/16") with optional collimator cone extension
• X-ray Field (at collimator tip): Diameter 60mm (2-3/8") / 35x45mm (1-3/8"x1-3/4") with optional diaphragm
• Duty Cycle: 1:32
• Exposure Times: 0.02 to 3.2s in 33 steps
• Anatomic Programs (ACP only): 30 pre-set times